Picking Out The Best Grout For Your Home Improvement Project

Grout is gross when it gets old, moldy and is ruining the look of your tile or mosaic floors. It is unsightly at best and disgusting at worst. It is however a necessary evil as grout is what holds your tile floor together. It doesn’t have to look this bad if you get the right grout cleaners Perth to take care of the dingy debris clogging up your tile lines. You also have choices on what kind of grout you use.

What Am I Dealing With Here With Grout?

The word sounds worse than it is. Grout is actually only cement, sand, gravel and colored tint. It is a viscous liquid that can be waterproof when sealed properly and with proper grout cleaners. You can choose from a few different kinds to use depending on the job you are doing.

There is Sanded and Unsanded

You do have choices with what kind of grout you use for your flooring. It depends on the style of the flooring, materials used and the color of your tiles.  It fills in the gaps and joints between floor or wall tiling. The most common types are sanded or unsanded grout. Grout can however be water resistant but you have to seal it every 2 to 3 years to keep it that way or water and other liquids will hit the joint and reach the backing. You need to be careful what kinds of grout cleaners you use do not break the seal.

Choosing Between the Two

If you need to pick which kind of grout we were going to use, sanded or unsanded, Unsanded grout is cement-based that is generally used on smaller tile joints or the spaces between the tiles. if the spaces are between one 16th of an inch to 1/8 of an inch this is when you use that. If it is used on joints that are too wide, it is possible that the grout could crack because there is not enough bonding that the sand provides. It is also in a more solid state than its sanded counterpart. Use grout cleaners that are safe for unsanded grout.

If You Have Wider Spaces between the Tiles

If the joints in your wall or flooring measure more than 1/8th inch, sanded grout is the better type to use. It has small sand grains or silica added to the mixture compound to help it set properly. You need the extra added texture to help it bind to the larger space between tiles. This kind should only be applied to moistened tiles and ones that follow the 1/8th inch and larger guideline. You need to be careful and test the grout in an inconspicuous area because the sand it may actually scratch the flooring. It needs to be done extremely carefully if your test results show it will scratch.